400*350mm(Limited to Single Row Placement on Left)
Cleaning Speed Range
Glass Thickness Within 3-19mm Vmax=1-20m/Min
Main Transmission Speed Adjustment Mode
Frequency Control
Table Height
900mm (Adjustable)
Total Power of The Whole Machine
41kw
Wind Heating Power
10kw (Optional)
Water Heating Power
10kw (Optional)
Source
380V 50Hz
Headwaters
Self Circulating Deionized Water Supplement (Provi
Weight
About 3800kg
Length
6500
Width
3366(4380)
Height)
2800
Type
Glass Washing and Drying Machine
Structure
Horizontal
Control System
PLC
Glass Washing Machine Type
Horizontal Glass Washing Machine
Condition
New
Warranty
One Year
Glass Edging Machine Type
0
Grinding Head Number
0
After-sales Service
Lifetime Warranty
Transport Package
Wooden Box, Steel Frame
Trademark
zhengke
Origin
Shandong, China
HS Code
8479899990
Production Capacity
1000 Sets/Year
Product Description
ZK2500 Glass washing machine Technical parameters and selection of relevant components
Structural features 1.Structural features
* The main drive adopts gear drive and frequency conversion speed regulation. The brush roller of the cleaning section rotates with two groups of motors, the upper and lower, which are driven by independent belts. The rotation is stable and the service life is extended. The special glass with high requirements for cleaning is realized by lifting and lowering the independent cylinder.
* Aluminum alloy assembled structure, no scrap concept, permanent use, high efficiency, energy saving up to 70% efficiency.
* The whole sheet metal part of the frame is sprayed with plastic.
* Complete machine conveying rubber roller( Φ 75mm) adopt imported butyl rubber (South Korea) vulcanized all-rubber covered stainless steel shaft structure (it is forbidden to contact acid liquid).
* The bearing pedestal of the whole machine adopts the new waterproof and wear-resistant bearing pedestal independently developed.
* The sheet metal of the cleaning part and the water contact part are all made of sus304 stainless steel material.
* Three pairs of brushes( Φ 160mm) stainless steel shaft configuration (washable LOW-E glass, common coated glass, without damaging the coated surface.)
* The cleaning section and air duct can be raised and lowered by 330mm (convenient for cleaning rubber roller, roller brush and equipment maintenance)
*Three pairs of special aluminum alloy wind blades are equipped, with strong wind power and good drying effect, with heating system.
*The air inlet of the fan box is equipped with an air filter, and the air knife area adopts a variety of noise reduction measures and exhaust devices to ensure low noise and small interference; The whole fan box is installed on the upper part of the workroom with independent fan rack, which is convenient for cleaning and inspection.
*The water tank of the washing machine can be moved, which is convenient for water tank cleaning, water change and inspection, so as to make the cleaning effect of the washing machine cleaner.
*Intelligent display of touch screen is adopted to facilitate manual operation; It is easy to operate, and the best configuration to reduce labor is to cooperate with wiring. 2.Technical parameter * Maximum glass width:2500mm
* Minimum glass size:400*350mm(Limited to single row placement at left and right sides)
* Glass thickness:3--25mm
* Cleaning speed range:The glass thickness is within 3-19mm Vmax=1-20m/min
* Main drive speed regulation mode: variable frequency speed regulation
* Table height: 900mm (adjustable)
* Total power of the whole machine: 41KW
* Wind heating power:10KW (optional)
* Water heating power:10KW (optional)
* Power Supply:380V 50Hz.
* The water tank is equipped with glass powder filter
* Water source: self-circulating deionized water supplement (deionized water equipment is prepared by the demander).
* Weight: about 3800KG
* Overall dimension (mm): 6500 * 3366 (4380) * 2800 (length * width * height) 3.Inspection and acceptance criteria
Inspection and acceptance criteria: drafted in accordance with the guidelines given in GB/T1.1-2009, check the glass with a black background fluorescent lamp. The glass shall be vertical, free of water stains, dry and free of scratches; The glass shall be free from deviation, chasing and roller marks. 4.Customer preparation.
1)3 * 25 square meters of national standard copper wire+10 square meters of zero wire.2)200A three-phase air switch.3)8mm gas pipe, about 10m
1)3 * 16 square meters of national standard copper wire+10 square meters of zero wire.2)100 three-phase air switch.3)10mm gas pipe, about 10m
Packing Details
Company Profile
Shandong Zhengke Automation Co., Ltd. was founded in 2014, located in Jiyang Industrial Park, Jinan, Shandong Province. The company covers an area of 5000 square meters, the core team of 50 people. Have independent technology design, research and development team. Have modern office space. Is the domestic professional glass machinery high-tech enterprises.
The company focuses on glass cutting machine.glass edging machine.glass washing machine.glass tempering machinery.insulating glass machine.glass tempering machine.laminated glass machine...etc. The company has more than 1500 terminal customers, with good reputation, won the recognition of the majority of customers. We have 2 independent technical patents, 12 Copyrights and 2 trademarks. The company developed a series of glass two-component glue machine advanced technology, sensitive reversing, continuous stability, high production efficiency, high degree of automation, easy to use; Widely used in two-component silicone structural adhesive, polysulfide adhesive, polyamine glue and other high accurate ratio, uniform mixing and fast operation occasions. Solve the phenomenon of high waste and low efficiency caused by manual work, is the ideal glass bonding production machine. The company adheres to the business philosophy of "Honest and trustworthy, and prosper enterprises with science and technology", based on talent, technology, service and reputation, not only to provide customers with high quality glass machine, but also to provide you with case debugging machine, technical consulting guides, staff operation training and other comprehensive after-sales service.
Our Advantages
We provide professional glass production solutions.
Professional online service team, any mail or message will reply within 24 hours.
We have a strong team provide wholehearted service to customer at any time.
We insist on Customer is Supreme, Staff toward Happiness.
Put the Quality as the first consideration;
OEM & ODM, customized design/logo/brand and package are acceptable.
Advanced production equipment, strict quality testing and control system to make sure superior quality.
Competitive price: we are a professional glass machine manufacturer in China, there is no middleman's profit, and you can get the most competitive price from us.
Good quality: good quality can be guaranteed, it will help you keep the market share well.
Fast delivery time: we have our own factory and professional manufacturer, which save your time to discuss with trading companies. We will try our best to meet your request.
Audited Supplier 
){kind=link}